Research

Altcoin Season Delayed? 2025 Crypto Market Cap Trends Explained

Altcoins remain under pressure in 2025. Explore why crypto market cap growth hasn't sparked an altcoin season and what needs to change for a breakout.
Token Metrics Team
8 min
MIN

In 2025, much of the altcoin market remains subdued. Prices for many tokens are still down more than 90% from their all-time highs. Despite sporadic rallies and renewed interest in certain sectors like meme coins or AI, a broader altcoin season has yet to materialize. The question facing many crypto investors now is: why?

In this analysis, we explore the macro and structural reasons for altcoin underperformance, unpack the liquidity bottleneck, and discuss what might change this narrative going forward.

The Data: Altcoins Still Deep in the Red

By mid-2025, most altcoins remain far below their PEAQ valuations from the last cycle. While Bitcoin and a few select large caps have recovered or even set new highs, the broader altcoin ecosystem continues to lag. This decoupling is not new—it happens every cycle—but the magnitude and persistence this time are notable.

A combination of market structure changes and supply-side dynamics are likely responsible.

Why Liquidity Hasn’t Returned

The most critical variable is liquidity. In previous bull runs, altcoin rallies were fueled by large inflows of new capital. This fresh money—often speculative—moved quickly through different sectors, inflating valuations across the board.

Today, however, the crypto market cap sits at around $3.3 trillion, with only ~$300 billion in net new capital added since the start of the cycle. At the same time, there are far more tokens than ever before. This mismatch between capital and available supply has diluted flows and suppressed upside for all but the strongest assets.

Instead of every token catching a bid, capital is rotating selectively, often into Bitcoin, a few meme coins, or tokens associated with highly visible narratives.

Token Supply Has Exploded

One major shift is the sheer number of tokens now on the market. Since the last bull run, the number of tradable crypto assets has increased significantly—perhaps by an order of magnitude. Many of these tokens have little to no trading volume, real users, or sustained community.

This oversupply of assets creates a fragmented market where attention and liquidity are spread thin. As a result, the days of altcoin beta—when nearly every token would rally simply because “the market is up”—may be over.

Going forward, performance may rely more on fundamentals, usage, and real demand.

Sector Rotation Dominates

Rather than broad-based rallies, the market is experiencing sectoral rotations. Capital flows aggressively between narratives: from meme coins to AI tokens, then to DePIN, and perhaps next to RWAs or perpetual DEXs.

This “hot potato” behavior means even when a sector performs, it's often short-lived. Many traders chase the next hype wave rather than allocating with conviction. The result is volatility without trend sustainability, and thin liquidity across most altcoins.

Institutions Are Still Focused on Bitcoin

Another reason altcoins lag is that institutional interest remains centered on Bitcoin—and to a lesser extent, Ethereum. This is particularly true in 2025, as the regulatory landscape slowly becomes more defined and risk appetite stays muted.

Bitcoin continues to benefit from a macro narrative that positions it as a hedge against inflation, fiat instability, and geopolitical risk. With potential for further escalation in global conflicts and economic uncertainty, BTC is often the first and only crypto asset to attract serious inflows.

Until altcoins can offer a comparable use case or risk-adjusted return, institutional capital will likely remain concentrated in BTC.

What Needs to Change

There are several potential catalysts that could eventually bring altcoins back into focus. These include:

  • Improved Liquidity: More capital entering crypto markets through new ETFs, stablecoin infrastructure, or sovereign adoption.
  • Macro Stabilization: A return to risk-on environments globally could expand investor appetite for high-beta crypto assets.
  • Real Usage: Tokens that can demonstrate strong on-chain revenue, user growth, or ecosystem traction may attract sustained demand.
  • Narrative Shifts: New technological breakthroughs or mass adoption events (e.g., consumer applications, financial integrations) could lead to renewed enthusiasm.
  • Token Burn and Scarcity: Projects that reduce supply through burns or buybacks may outperform in a low-liquidity world.

Avoiding the “Musical Chairs” Risk

An important takeaway from the current market environment is the growing risk of holding underperforming assets too long. The metaphor of “musical chairs” applies here—when the music stops, not all tokens will have a place.

Just as the dot-com bubble led to a major culling of internet companies, the crypto market may be undergoing a similar filtering process. Those with product-market fit, sustainable economics, and user adoption will likely survive. Others may not recover.

Bitcoin as the Benchmark

Bitcoin has become the benchmark asset for crypto, both in terms of performance and narrative. It remains the asset most closely tied to global macro conditions and institutional flows.

Its relative strength has made it a measuring stick for evaluating the rest of the market. Many altcoins are now being judged not just in fiat terms, but in BTC-relative performance. If they can’t outperform Bitcoin on a risk-adjusted basis, they may struggle to justify their place in portfolios.

Long-Term Outlook: Selective Optimism

Despite short-term underperformance, we remain open to altcoin opportunities—but with greater caution and selectivity. The current environment favors a “barbell strategy”: holding a core position in Bitcoin while selectively allocating to altcoins with verifiable traction.

This is no longer a market where every token rides the same wave. Success in 2025 likely comes from identifying the few that can break out due to clear product value, strong teams, and real-world adoption.

Conclusion

The altcoin market in 2025 reflects a maturing, more fragmented crypto ecosystem. The free liquidity and speculative exuberance of previous cycles have given way to a more competitive, filtered environment.

For investors and builders alike, this isn’t a reason to despair—but a reason to be more focused. As the market resets, those who adapt their frameworks to the new reality may find long-term success. The next wave of winners may already be building—quietly, under the surface.

Build Smarter Crypto Apps &
AI Agents in Minutes, Not Months
Real-time prices, trading signals, and on-chain insights all from one powerful API.
Grab a Free API Key
Token Metrics Team
Token Metrics Team

Recent Posts

Research

A Comprehensive Guide to Mining Ethereum

Token Metrics Team
4
MIN

Introduction

Ethereum mining has been an essential part of the Ethereum blockchain network, enabling transaction validation and new token issuance under a Proof-of-Work (PoW) consensus mechanism. As Ethereum evolves, understanding the fundamentals of mining, the required technology, and operational aspects can provide valuable insights into this cornerstone process. This guide explains the key components of Ethereum mining, focusing on technical and educational details without promotional or financial advice.

How Ethereum Mining Works

Ethereum mining involves validating transactions and securing the network by solving complex mathematical problems using computational resources. Miners employ high-performance hardware to perform hashing calculations and compete to add new blocks to the blockchain. Successfully mined blocks reward miners with Ether (ETH) generated through block rewards and transaction fees.

At its core, Ethereum mining requires:

  • Mining hardware: specialized components optimized for hashing functions
  • Mining software: programs that connect hardware to the network and coordinate mining efforts
  • Network connection: stable and efficient internet connectivity
  • Mining pool participation: collaborative groups of miners combining hash power

Choosing Mining Hardware

GPU-based mining rigs are currently the standard hardware for Ethereum mining due to their efficiency in processing the Ethash PoW algorithm. Graphics Processing Units (GPUs) are well-suited for the memory-intensive hashing tasks required for Ethereum, as opposed to ASICs (Application-Specific Integrated Circuits) that tend to specialize in other cryptocurrencies.

Key considerations when selecting GPUs include:

  • Hashrate: the measure of mining speed, usually expressed in MH/s (megahashes per second)
  • Energy efficiency: power consumption relative to hashing performance
  • Memory capacity: minimum 4GB VRAM required for Ethereum mining
  • Cost: initial investment balanced against expected operational expenses

Popular GPUs such as the Nvidia RTX and AMD RX series often top mining performance benchmarks. However, hardware availability and electricity costs significantly impact operational efficiency.

Setting Up Mining Software

Once mining hardware is selected, the next step involves configuring mining software suited for Ethereum. Mining software translates computational tasks into actionable processes executed by the hardware while connecting to the Ethereum network or mining pools.

Common mining software options include:

  • Ethminer: an open-source solution tailored for Ethereum
  • Claymore Dual Miner: supports mining Ethereum alongside other cryptocurrencies
  • PhoenixMiner: known for its stability and efficiency

When configuring mining software, consider settings related to:

  • Pool address: if participating in a mining pool
  • Wallet address: for receiving mining rewards
  • GPU tuning parameters: to optimize performance and power usage

Understanding Mining Pools

Mining Ethereum independently can be challenging due to increasing network difficulty and competition. Mining pools provide cooperative frameworks where multiple miners combine computational power to improve chances of mining a block. Rewards are then distributed proportionally according to contributed hash power.

Benefits of mining pools include:

  • Reduced variance: more frequent, smaller payouts compared to solo mining
  • Community support: troubleshooting and shared resources
  • Scalability: enabling participation even with limited hardware

Popular mining pools for Ethereum include Ethermine, SparkPool, and Nanopool. When selecting a mining pool, evaluate factors such as fees, payout methods, server locations, and minimum payout thresholds.

Operational Expenses and Efficiency

Mining Ethereum incurs ongoing costs, primarily electricity consumption and hardware maintenance. Efficiency optimization entails balancing power consumption with mining output to ensure sustainable operations.

Key factors to consider include:

  • Electricity costs: regional rates greatly influence profitability and operational feasibility
  • Hardware lifespan: consistent usage causes wear, requiring periodic replacements
  • Cooling solutions: to maintain optimal operating temperatures and prevent hardware degradation

Understanding power consumption (wattage) of mining rigs relative to their hashrate assists in determining energy efficiency. For example, a rig with a hashrate of 60 MH/s consuming 1200 watts has different efficiency metrics compared to others.

Monitoring and Analytics Tools

Efficient mining operations benefit from monitoring tools that track hardware performance, network status, and market dynamics. Analytical platforms offer data-backed insights that can guide equipment upgrades, pool selection, and operational adjustments.

Artificial intelligence-driven research platforms like Token Metrics provide quantitative analysis of Ethereum network trends and mining considerations. Leveraging such tools can optimize decision-making by integrating technical data with market analytics without endorsing specific investment choices.

Preparing for Ethereum Network Evolution

Ethereum’s transition from Proof-of-Work to Proof-of-Stake (PoS), known as Ethereum 2.0, represents a significant development that impacts mining practices. PoS eliminates traditional mining in favor of staking mechanisms, which means Ethereum mining as performed today may phase out.

Miners should remain informed about network upgrades and consensus changes through official channels and reliable analysis platforms like Token Metrics. Understanding potential impacts enables strategic planning related to hardware usage and participation in alternative blockchain activities.

Educational Disclaimer

This article is intended for educational purposes only. It does not offer investment advice, price predictions, or endorsements. Readers should conduct thorough individual research and consider multiple reputable sources before engaging in Ethereum mining or related activities.

Research

Understanding the Evolution and Impact of Web 3 Technology

Token Metrics Team
5
MIN

Introduction to Web 3

The digital landscape is continually evolving, giving rise to a new paradigm known as Web 3. This iteration promises a shift towards decentralization, enhanced user control, and a more immersive internet experience. But what exactly is Web 3, and why is it considered a transformative phase of the internet? This article explores its fundamentals, technology, potential applications, and the tools available to understand this complex ecosystem.

Defining Web 3

Web 3, often referred to as the decentralized web, represents the next generation of internet technology that aims to move away from centralized platforms dominated by a few major organizations. Instead of relying on centralized servers, Web 3 utilizes blockchain technology and peer-to-peer networks to empower users and enable trustless interactions.

In essence, Web 3 decentralizes data ownership and governance, allowing users to control their information and digital assets without intermediaries. This marks a significant departure from Web 2.0, where data is predominantly managed by centralized corporations.

Key Technologies Behind Web 3

Several emerging technologies underpin the Web 3 movement, each playing a vital role in achieving its vision:

  • Blockchain: A distributed ledger system ensuring transparency, security, and immutability of data. It replaces traditional centralized databases with decentralized networks.
  • Decentralized Applications (dApps): Applications running on blockchain networks providing services without a central controlling entity.
  • Smart Contracts: Self-executing contracts with coded rules, enabling automated and trustless transactions within the Web 3 ecosystem.
  • Decentralized Finance (DeFi): Financial services built on blockchain, offering alternatives to traditional banking systems through peer-to-peer exchanges.
  • Non-Fungible Tokens (NFTs): Unique digital assets representing ownership of items like art, music, or virtual real estate verified on a blockchain.

Together, these technologies provide a robust foundation for a more autonomous and transparent internet landscape.

Contrasting Web 3 With Web 2

Understanding Web 3 requires comparing it to its predecessor, Web 2:

  • Data Control: Web 2 centralizes data with platform owners; Web 3 returns data ownership to users.
  • Intermediaries: Web 2 relies heavily on intermediaries for operations; Web 3 enables direct interaction between users via decentralized protocols.
  • Monetization Models: Web 2 monetizes mainly through targeted ads and user data; Web 3 offers new models such as token economies supported by blockchain.
  • Identity: Web 2 uses centralized identity management; Web 3 incorporates decentralized identity solutions allowing greater privacy and user control.

This shift fosters a more user-centric, permissionless, and transparent internet experience.

Potential Applications of Web 3

Web 3's decentralized infrastructure unlocks numerous application possibilities across industries:

  • Social Media: Platforms that return content ownership and revenue to creators rather than centralized corporations.
  • Finance: Peer-to-peer lending, decentralized exchanges, and transparent financial services enabled by DeFi protocols.
  • Gaming: Games featuring true asset ownership with NFTs and player-driven economies.
  • Supply Chain Management: Immutable tracking of goods and provenance verification.
  • Governance: Blockchain-based voting systems enhancing transparency and participation.

As Web 3 matures, the range of practical and innovative use cases is expected to expand further.

Challenges and Considerations

Despite its promise, Web 3 faces several hurdles that need attention:

  • Scalability: Current blockchain networks can encounter performance bottlenecks limiting widespread adoption.
  • User Experience: Interfaces and interactions in Web 3 must improve to match the seamlessness users expect from Web 2 platforms.
  • Regulatory Environment: Legal clarity around decentralized networks and digital assets remains a work in progress globally.
  • Security: While blockchain offers security benefits, smart contract vulnerabilities and user key management pose risks.

Addressing these challenges is crucial for realizing the full potential of Web 3.

How to Research Web 3 Opportunities

For individuals and organizations interested in understanding Web 3 developments, adopting a structured research approach is beneficial:

  1. Fundamental Understanding: Study blockchain technology principles and the differences between Web 2 and Web 3.
  2. Use Analytical Tools: Platforms like Token Metrics provide data-driven insights and ratings on Web 3 projects, helping to navigate the complex ecosystem.
  3. Follow Reputable Sources: Stay updated with academic papers, technical blogs, and industry news.
  4. Experiment with Applications: Engage hands-on with dApps and blockchain platforms to gain practical understanding.
  5. Evaluate Risks: Recognize technical, operational, and regulatory risks inherent to emerging Web 3 projects.

This approach supports informed analysis based on technology fundamentals rather than speculation.

The Role of AI in Web 3 Research

Artificial intelligence technologies complement Web 3 by enhancing research and analytical capabilities. AI-driven platforms can process vast amounts of blockchain data to identify patterns, assess project fundamentals, and forecast potential developments.

For example, Token Metrics integrates AI methodologies to provide insightful ratings and reports on various Web 3 projects and tokens. Such tools facilitate more comprehensive understanding for users navigating decentralized ecosystems.

Conclusion

Web 3 embodies a transformative vision for the internet—one that emphasizes decentralization, user empowerment, and innovative applications across multiple sectors. While challenges remain, its foundational technologies like blockchain and smart contracts hold substantial promise for reshaping digital interactions.

Continuing research and utilization of advanced analytical tools like Token Metrics can help individuals and organizations grasp Web 3’s evolving landscape with clarity and rigor.

Disclaimer

This article is for educational and informational purposes only and does not constitute financial, investment, or legal advice. Readers should conduct their own research and consult with professional advisors before making any decisions related to Web 3 technologies or digital assets.

Research

A Comprehensive Guide to Minting Your Own NFT

Token Metrics Team
4
MIN

Introduction to NFT Minting

The explosion of interest in non-fungible tokens (NFTs) has opened new opportunities for creators and collectors alike. If you've ever wondered, "How can I mint my own NFT?", this guide will walk you through the essential concepts, processes, and tools involved in creating your unique digital asset on the blockchain.

What is NFT Minting?

Minting an NFT refers to the process of turning a digital file — such as artwork, music, video, or other digital collectibles — into a unique token recorded on a blockchain. This tokenization certifies the originality and ownership of the asset in a verifiable manner. Unlike cryptocurrencies, NFTs are unique and cannot be exchanged on a one-to-one basis.

Choosing the Right Blockchain for NFT

Several blockchains support NFT minting, each with distinct features, costs, and communities. The most popular blockchain for NFTs has been Ethereum due to its widespread adoption and support for ERC-721 and ERC-1155 token standards. However, alternatives such as Binance Smart Chain, Solana, Polygon, and Tezos offer different advantages, such as lower transaction fees or faster processing times.

When deciding where to mint your NFT, consider factors like network fees (also known as gas fees), environmental impact, and marketplace support. Analytical tools, including Token Metrics, can offer insights into blockchain performance and trends, helping you make an informed technical decision.

Selecting an NFT Platform

Once you have chosen a blockchain, the next step is to select an NFT platform that facilitates minting and listing your digital asset. Popular NFT marketplaces such as OpenSea, Rarible, Foundation, and Mintable provide user-friendly interfaces to upload digital files, set metadata, and mint tokens.

Some platforms have specific entry requirements, such as invitation-only access or curation processes, while others are open to all creators. Consider the platform's user base, fees, minting options (e.g., lazy minting or direct minting), and supported blockchains before proceeding.

Step-by-Step Process to Mint Your Own NFT

  1. Prepare Your Digital Asset: Have your digital file ready — this could be an image, audio, video, or 3D model.
  2. Create a Digital Wallet: Set up a cryptocurrency wallet (such as MetaMask or Trust Wallet) compatible with your chosen blockchain and platform.
  3. Fund Your Wallet: Add some cryptocurrency to your wallet to cover minting and transaction fees. For Ethereum-based platforms, this typically means ETH.
  4. Connect Wallet to Platform: Link your wallet to the NFT marketplace where you intend to mint your NFT.
  5. Upload Your File and Add Metadata: Provide necessary details, including title, description, and any unlockable content.
  6. Mint the NFT: Initiate the minting process. The platform will create the token on the blockchain and assign it to your wallet.
  7. Manage and List Your NFT: After minting, you can choose to keep, transfer, or list the NFT for sale on the marketplace.

Understanding Costs and Fees

Minting an NFT typically involves transaction fees known as gas fees, which vary based on blockchain network congestion and platform policies. Costs can fluctuate significantly; therefore, it's prudent to monitor fee trends, potentially using analytical resources like Token Metrics to gain visibility into network conditions.

Some NFT platforms offer "lazy minting," allowing creators to mint NFTs with zero upfront fees, with costs incurred only upon sale. Understanding these financial mechanics is crucial to planning your minting process efficiently.

Leveraging AI Tools in NFT Creation and Analysis

The intersection of artificial intelligence and blockchain has produced innovative tools that assist creators and collectors throughout the NFT lifecycle. AI can generate creative artwork, optimize metadata, and analyze market trends to inform decisions.

Research platforms such as Token Metrics utilize AI-driven methodologies to provide data insights and ratings that support neutral, analytical understanding of blockchain assets, including aspects relevant to NFTs. Employing such tools can help you better understand the technical fundamentals behind NFT platforms and ecosystems.

Key Considerations and Best Practices

  • File Authenticity and Ownership: Ensure you have the rights to tokenize the digital content.
  • Security: Use secure wallets and protect your private keys to prevent unauthorized access.
  • Metadata Accuracy: Properly describe and tag your NFT to enhance discoverability and traceability.
  • Platform Reputation: Choose well-known platforms to benefit from better security and liquidity.
  • Stay Updated: The NFT space evolves rapidly—leveraging analytical tools like Token Metrics can help track developments.

Conclusion

Minting your own NFT involves understanding the technical process of creating a unique token on a blockchain, choosing appropriate platforms, managing costs, and utilizing supporting tools. While the process is accessible to many, gaining analytical insights and leveraging AI-driven research platforms such as Token Metrics can deepen your understanding of underlying technologies and market dynamics.

Disclaimer

This article is for educational purposes only and does not constitute financial or investment advice. Always conduct your own research and consult professionals before engaging in digital asset creation or transactions.

Choose from Platinum, Gold, and Silver packages
Reach with 25–30% open rates and 0.5–1% CTR
Craft your own custom ad—from banners to tailored copy
Perfect for Crypto Exchanges, SaaS Tools, DeFi, and AI Products