Back to blog
Research

How Do You Implement Multi-Signature Wallets? A Complete 2025 Guide

Learn how to implement multi-signature wallets securely with our comprehensive guide, enhancing your crypto asset protection through strategic configurations and best practices.
Token Metrics Team
8
Want Smarter Crypto Picks—Free?
See unbiased Token Metrics Ratings for BTC, ETH, and top alts.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
 No credit card | 1-click unsubscribe

Multi-signature wallets represent one of the most powerful security innovations in cryptocurrency, providing enhanced protection against theft, loss, and unauthorized access. As digital assets become increasingly valuable and institutional adoption accelerates, understanding how to implement multi-signature (multisig) solutions has become essential for serious cryptocurrency holders. Whether you're managing organizational treasury funds, protecting family wealth, or simply seeking maximum security for substantial holdings, multisig wallets offer unparalleled control and redundancy.

Understanding Multi-Signature Wallet Technology

A multi-signature wallet requires multiple private keys to authorize a transaction, rather than the single key used in standard wallets. This distributed control model is typically expressed as "M-of-N," where N represents the total number of keys and M represents the minimum number required to authorize transactions.

For example, a 2-of-3 multisig wallet has three total keys, but only two are needed to move funds. This configuration provides security against single key compromise while offering recovery options if one key is lost. The cryptographic implementation occurs at the blockchain protocol level, meaning transaction authorization requirements are enforced by the network itself, not by centralized services.

The beauty of multisig lies in eliminating single points of failure. Even if an attacker compromises one key through hacking, phishing, or physical theft, they cannot access funds without obtaining additional keys stored in separate locations with different security measures.

Common Multi-Signature Configurations

  • 2-of-2 Multisig: This configuration requires both keys to authorize transactions, providing maximum security but no redundancy. Suitable for partnerships where both parties must approve every transaction. However, losing either key permanently locks funds, making this setup risky without proper backup strategies.
  • 2-of-3 Multisig: The most popular configuration balances security and practicality. You might keep one key on a hardware wallet at home, another in a safe deposit box, and a third with a trusted family member or professional custodian. Any two keys authorize transactions, so losing one key doesn't create catastrophic loss. This setup protects against theft (attacker needs two separate keys) while providing recovery options.
  • 3-of-5 Multisig: Organizations often use this configuration, distributing keys among multiple executives or board members. It requires broader consensus for transactions while tolerating loss of up to two keys. The increased complexity matches the higher stakes of organizational treasury management.
  • Advanced Custom Configurations: Advanced users implement schemes like 4-of-7 or 5-of-9 for maximum security and redundancy. These complex arrangements suit high-value holdings, institutional custody, or scenarios requiring distributed governance. However, operational complexity increases proportionally—more keys mean more coordination and management overhead.

Choosing the Right Multi-Signature Wallet Solution

Hardware-Based Solutions

Ledger and Trezor both support multisig configurations, allowing you to use multiple hardware wallets as cosigners. This approach keeps private keys isolated on secure hardware while enabling distributed control. Setting up hardware-based multisig typically involves initializing multiple devices, creating a multisig wallet through compatible software, and registering each hardware wallet as a cosigner.

Coldcard particularly excels for Bitcoin multisig, offering air-gapped security and extensive multisig features. Its advanced capabilities suit security-conscious users willing to navigate more complex setup procedures for maximum protection.

Software Coordinators

While keys should reside on hardware wallets, coordinator software manages multisig wallet creation and transaction building. Electrum provides robust Bitcoin multisig support with straightforward setup procedures. Sparrow Wallet offers excellent multisig features with superior user experience and advanced capabilities.

For Ethereum and ERC-20 tokens, Gnosis Safe (formerly Gnosis Multisig) has become the industry standard, particularly for DeFi treasury management. Its web interface simplifies multisig operations while maintaining security through hardware wallet integration.

Blockchain-Specific Considerations

Bitcoin's native multisig support through P2SH (Pay-to-Script-Hash) and P2WSH (Pay-to-Witness-Script-Hash) addresses provides robust, time-tested functionality. Ethereum implements multisig through smart contracts, offering more flexibility but requiring gas for deployment and transactions.

Other blockchains like Solana, Cardano, and Polkadot each have unique multisig implementations. Research your specific blockchain's multisig capabilities before committing to particular solutions.

Step-by-Step Implementation Process

Planning Your Configuration

Begin by determining the appropriate M-of-N configuration for your needs. Consider security requirements, number of parties involved, operational frequency, and recovery scenarios. Document your security model clearly, including who controls which keys and under what circumstances transactions should be authorized.

Acquiring Hardware Wallets

Purchase the necessary hardware wallets directly from manufacturers. For a 2-of-3 setup, you need three separate hardware wallets. Never reuse the same device or seed phrase—each cosigner must have completely independent keys.

Initializing Individual Wallets

Set up each hardware wallet independently, generating unique seed phrases for each device. Record seed phrases on durable materials and store them in separate secure locations. Never digitize seed phrases or store multiple phrases together.

Creating the Multisig Wallet

Using your chosen coordinator software, create the multisig wallet by registering each hardware wallet as a cosigner. The software will request the public key or extended public key (xpub) from each device—note that you're sharing public keys only, not private keys.

The coordinator generates the multisig address where funds will be stored. This address is cryptographically linked to all registered cosigner public keys, ensuring only transactions signed with the required number of private keys will be accepted by the blockchain.

Testing with Small Amounts

Before transferring substantial funds, thoroughly test your multisig setup. Send a small amount to the multisig address, then practice creating and signing transactions with the required number of keys. Verify you can successfully move funds out of the wallet before trusting it with significant amounts.

Test recovery scenarios by attempting to transact using different combinations of keys. Ensure you understand the complete transaction signing workflow and that all cosigners can successfully participate.

Making Strategic Decisions with Professional Analytics

Implementing multisig security is just one component of successful cryptocurrency management. Making informed decisions about which assets to hold, when to rebalance, and how to optimize your portfolio requires sophisticated analytical capabilities.

Discover Crypto Gems with Token Metrics AI

Operational Best Practices

Key Distribution Strategy

Distribute keys across multiple physical locations with different security profiles. Never store multiple keys in the same location—this defeats the purpose of multisig. Consider geographic distribution to protect against localized disasters like fires or floods.

For keys held by different individuals, ensure clear communication protocols exist. Everyone involved should understand their responsibilities, how to recognize legitimate transaction requests, and procedures for emergency situations.

Transaction Workflow

Establish clear processes for initiating, reviewing, and signing transactions. Who can propose transactions? What review occurs before cosigners add signatures? How are urgent situations handled? Documented workflows prevent confusion and ensure all parties understand their roles.

Use the coordinator software to create transactions, which are then presented to cosigners for review and signature. Each cosigner independently verifies transaction details before signing with their private key. Only after collecting the required number of signatures is the transaction broadcast to the blockchain.

Regular Audits and Drills

Periodically verify all keys remain accessible and functional. Practice the complete transaction signing process quarterly or semi-annually to ensure everyone remembers procedures and that all hardware and software remain compatible and updated.

Test recovery scenarios where one or more keys become unavailable. Verify you can still access funds using alternative key combinations. These drills identify potential issues before emergencies occur.

Security Considerations

Protecting Against Internal Threats

While multisig protects against external attackers, consider internal threats. In a 2-of-3 configuration, any two key holders could collude to steal funds. Select cosigners carefully and consider configurations requiring more keys for higher-value holdings.

Software and Hardware Updates

Keep coordinator software and hardware wallet firmware updated to patch security vulnerabilities. However, test updates on small amounts before applying them to wallets holding substantial funds. Occasionally, updates introduce compatibility issues that could temporarily lock access.

Backup and Recovery Documentation

Create comprehensive documentation of your multisig setup, including the configuration type, which hardware wallets serve as cosigners, extended public keys, and the multisig address itself. Store this information separately from seed phrases—someone recovering your wallet needs this metadata to reconstruct the multisig configuration.

Common Pitfalls to Avoid

Never store multiple seed phrases together, as this recreates single point of failure vulnerabilities. Don't skip testing phases—discover operational issues with small amounts rather than substantial holdings. Avoid overly complex configurations that create operational difficulties, and ensure at least one other trusted person understands your multisig setup for inheritance purposes.

Advanced Features and Future Developments

Modern multisig solutions increasingly incorporate time-locks, spending limits, and white-listing features. Smart contract-based multisig wallets on Ethereum offer programmable conditions like daily spending caps, recovery mechanisms after extended inactivity, and role-based permissions.

Emerging developments include social recovery mechanisms where trusted contacts can help recover wallets, threshold signature schemes (TSS) that improve privacy and efficiency compared to traditional multisig, and standardization efforts making multisig more accessible across different blockchains and wallet providers.

Conclusion

Implementing multi-signature wallets significantly enhances cryptocurrency security by eliminating single points of failure and providing recovery options. While setup requires more effort than standard wallets, the protection multisig offers for substantial holdings justifies the additional complexity.

By carefully planning your configuration, using quality hardware wallets, following proper operational procedures, and leveraging professional platforms like Token Metrics for strategic decision-making, you can build a robust security framework that protects your digital assets while maintaining practical accessibility.

In an ecosystem where theft and loss are permanent and irreversible, multisig represents best practice for serious cryptocurrency holders who refuse to gamble with their financial future.

Build Smarter Crypto Apps &
AI Agents in Minutes, Not Months
Real-time prices, trading signals, and on-chain insights all from one powerful API.
Grab a Free API Key
About Token Metrics
Token Metrics: AI-powered crypto research and ratings platform. We help investors make smarter decisions with unbiased Token Metrics Ratings, on-chain analytics, and editor-curated “Top 10” guides. Our platform distills thousands of data points into clear scores, trends, and alerts you can act on.
30 Employees
analysts, data scientists, and crypto engineers
30 Employees
analysts, data scientists, and crypto engineers
30 Employees
analysts, data scientists, and crypto engineers
Want Smarter Crypto Picks—Free?
See unbiased Token Metrics Ratings for BTC, ETH, and top alts.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
 No credit card | 1-click unsubscribe
Token Metrics Team
Token Metrics Team

Recent Posts

Research

How to Find Low Cap Altcoins with Maximum Growth Potential | Token Metrics Moonshots

Token Metrics Team
8 min

Cryptocurrency is one of the few markets where small investments can turn into life-changing gains—if you know where to look. The secret? Low cap altcoins with strong fundamentals, fresh narratives, and early momentum. These are often called moonshots—tokens that can 10x, 50x, or even 100x your portfolio.

But with thousands of projects launching every year, how do you separate noise from real opportunity?

This is where Token Metrics, the industry’s most powerful crypto analytics platform, gives you a massive edge. In this guide, you’ll learn exactly how to find high-potential low cap altcoins before they explode.

What Are Moonshots?

In crypto, a moonshot refers to a token that’s expected to deliver exponential returns—usually 10x or more—within a short to medium timeframe. These tokens often:

  • Have a market cap below $50 million
  • Are newly launched or under-discovered
  • Operate in trending sectors like AI, DePIN, L2s, or Real-World Assets
  • Are supported by strong narratives or early whale interest

Moonshots are high-risk, high-reward plays. They may not have widespread recognition yet, but they often show early signs of momentum—and if timed correctly, they can outperform even the biggest names in crypto.

How Do Moonshots Work?

Moonshots usually follow a predictable cycle:

1. Discovery Phase

Savvy traders, insiders, or analysts begin accumulating the token quietly. There’s little public attention, but strong fundamentals or a promising narrative.

2. Hype Trigger

Something sparks attention—this could be an influencer tweet, exchange listing, or key milestone. Volume begins to rise.

3. FOMO Phase

Retail investors pour in as the token gains traction. Price rallies dramatically in a short period.

4. Profit-Taking

Early entrants sell, leading to price volatility. If the project has long-term merit, it may consolidate and rally again. If not, it could retrace sharply.

The goal is to get in early—before the FOMO begins. And that’s where Token Metrics shines.

Why Token Metrics Is the Best Platform for Finding Moonshots

Token Metrics is an AI-powered crypto research platform that filters through thousands of tokens daily to highlight only those with real upside potential. Its proprietary Moonshots feature is specifically designed to uncover undervalued low cap altcoins before they trend on X (Twitter), YouTube, or Telegram.

Key Benefits:

  • âś… AI-powered ratings based on technical, on-chain, and fundamental data
  • âś… Real-time moonshot detection with transparent performance tracking
  • âś… Seamless trading integration for quick entries
  • âś… Past Moonshot ROI tracking to evaluate model accuracy
  • âś… Bullish signal alerts and whale activity monitoring

Token Metrics doesn’t just show you what's trending—it shows you what’s about to trend.

How to Use Token Metrics to Find Moonshots

Here’s a step-by-step guide to using Token Metrics to discover low cap altcoins with maximum growth potential:

âś… Step 1: Go to the Ratings Page

  • From your Token Metrics dashboard, click on the “Ratings” tab.
  • This is where thousands of tokens are ranked daily based on Trader Grade (short-term upside) and Investor Grade (long-term fundamentals).

These scores are derived using over 80 data points, including:

  • Price momentum
  • Volume analysis
  • Sentiment scores
  • On-chain activity
  • Developer and GitHub activity

✅ Step 2: Click on the “Moonshots” Tab

At the top of the Ratings page, you’ll see the Moonshots tab—click it.

This tab highlights AI-flagged altcoins with breakout potential. These tokens are typically:

  • Low to mid-cap
  • Recently showing an upward trend in volume or price
  • Exhibiting bullish on-chain signals
  • Gaining attention in social channels

These are the best candidates for fast and explosive growth.

âś… Step 3: Review Key Metrics

Each token in the Moonshots section displays several key data points:

  • Trader Grade and its change over time
  • 24-Hour Volume – is attention building?
  • Market Cap – lower cap means higher potential upside
  • Date of Entry – when the token was first flagged
  • Live ROI Since Entry – how the pick has performed since being listed

You can also switch to the Past Moonshots tab to review historical picks and how they played out over 7–14 days. This transparency gives you confidence in the AI’s track record.

âś… Step 4: Choose a Token to Explore

Click on any token to open its Token Details Page.

Here, you’ll get in-depth analysis, including:

  • Live price chart
  • Key technical indicators (MACD, RSI, moving averages)
  • Tokenomics and utility breakdown
  • Whale wallet activity and top holders
  • Fundamental metrics like team, roadmap, and ecosystem

Use this data to perform a quick due diligence check before buying. This helps reduce risk and boost conviction.

âś… Step 5: Buy in Seconds

Once you’ve selected a moonshot you like:

  • Click the “Buy” button directly from the Moonshots page.
  • A swap widget will open, allowing you to purchase the token using your connected wallet.
  • You can buy directly from decentralized exchanges (DEXs) without leaving the platform.

This seamless flow—from research to execution—makes it incredibly easy to act quickly, which is crucial in fast-moving markets.

Real Examples of Moonshots That Delivered

Here are just a few examples of tokens previously flagged in Token Metrics Moonshots:

  • Gorbagana – Gained over 50% in a day
  • Useless Coin – Jumped 40% in 24 hours
  • Startup Coin – Delivered a 9x return over a month

These weren’t hyped on mainstream platforms—Token Metrics identified them early using AI-based indicators and on-chain data.

Final Thoughts: Find Your Next 100x

Finding low cap altcoins with maximum growth potential doesn’t have to be based on luck or hype. With the right tools, strategy, and platform, you can identify moonshots before they go parabolic.

Token Metrics Moonshots gives you the insights, data, and tools needed to make smarter, faster, and more confident trading decisions. From AI-powered ratings to seamless swap integration, it’s your all-in-one dashboard for finding the next big crypto opportunity.

So if you're serious about building wealth in the next bull run, don’t just follow the herd—get ahead of it.

🚀 Start your 7-day free trial at and unlock real-time access to Moonshots.

Crypto Basics

How to Find Undervalued Altcoins That Could 100x | Token Metrics Moonshots

Token Metrics Team
8 min

In the fast-paced world of crypto, finding an altcoin before it explodes is every investor’s dream. The reality? Most people arrive too late—after the hype, after the parabolic move, and after the gains are gone. But what if there was a way to spot these undervalued altcoins before they skyrocket?

In this guide, we’ll show you how to find 100x altcoins early using a proven strategy powered by Token Metrics Moonshot Ratings. Whether you're a seasoned trader or a curious beginner, this step-by-step framework will help you identify tokens that are flying under the radar—but not for long.

What Are Moonshots?

In crypto, a moonshot is a token with the potential to deliver extraordinary returns, sometimes as high as 100x or even 1000x. These tokens typically start with:

  • Low market cap
  • High volatility
  • Speculative narratives
  • Early-stage community engagement

While some moonshots are driven by memes or hype, the best ones are backed by emerging narratives, strong tokenomics, and real momentum. The trick is to find them before they hit mainstream attention.

How Moonshot Altcoins Work

Moonshots follow a pattern:

  1. Early Accumulation Phase
    Smart money—whales, insiders, or savvy analysts—start quietly buying the token while it’s still underpriced and unknown.
  2. Sentiment + Volume Spike
    Word begins to spread. Crypto Twitter, Telegram groups, and early backers begin to create buzz. This brings in more liquidity and attention.
  3. Parabolic Price Action
    As FOMO (Fear of Missing Out) kicks in, the price goes vertical. Retail investors pile in. This is when the token moons.
  4. Top and Correction
    The token either consolidates, retraces, or crashes as early investors take profits and late entrants get burned.

Your goal? Enter in Phase 1 or early Phase 2, before everyone else sees the opportunity.

So how do you do that? With data—not hype.

How to Use Token Metrics to Find Moonshots

Token Metrics is one of the most powerful AI-driven platforms for crypto research. It helps you filter out the noise and identify undervalued altcoins with moonshot potential based on over 80 data points including technicals, fundamentals, on-chain activity, and sentiment.

Here’s a step-by-step guide to using Token Metrics’ Moonshots feature:

âś… Step 1: Go to the Ratings Page

Once you log in to Token Metrics, head over to the Ratings tab.

This is the heart of the platform, where every token is scored using:

  • Trader Grade – Best for short-term price action predictions
  • Investor Grade – Better for long-term conviction

You’ll see a ranked list of tokens with up-to-date analytics based on market behavior.

Tip: Sort by Trader Grade change to find tokens gaining momentum fast.

✅ Step 2: Click on the “Moonshots” Tab

Inside the Ratings page, look for the Moonshots tab near the top.

This is where Token Metrics highlights altcoins with breakout potential, flagged by proprietary AI models that monitor price anomalies, trend shifts, volume surges, and social indicators.

Only tokens that meet strict short-term upside criteria make it into this section.

âś… Step 3: Review Key Metrics

Each token in the Moonshots tab is presented with a powerful summary:

  • Trader Grade + % change
  • 24H Volume – Is money flowing in?
  • Market Cap – Lower cap = more potential for exponential growth
  • Date of Entry – How long has it been flagged as a moonshot?
  • Live ROI Since Entry – See how the token has performed since it was added to the list

Want to verify the track record? Switch to “Past Moonshots” to see historical picks and their 7–14 day performance.

âś… Step 4: Choose a Token to Explore

Click on a token to open its Token Details Page—this is where the real research begins.

You'll find:

  • Live chart and price action
  • On-chain data and sentiment
  • Top holders (including whales and smart wallets)
  • AI-generated technical indicators
  • Narrative tags (e.g., AI, DePIN, L2, Gaming)

This page helps you validate whether a moonshot token is worth the risk.

Is the project active on GitHub? Is the community growing? Are whales accumulating? All signs that a moonshot may be ready to launch.

âś… Step 5: Buy in Seconds

Found a token you like?

Token Metrics makes it easy to act:

  • Just click the Buy button from the Moonshots page.
  • This launches a swap widget integrated with top decentralized exchanges.
  • Choose your wallet, confirm the trade, and you're in—without ever leaving the platform.

This removes friction and saves time, especially when speed is critical.

Why Token Metrics Moonshots Beat Traditional Research

There are thousands of altcoins on the market—and most of them are noise. Token Metrics uses machine learning, real-time market signals, and historical backtesting to filter the noise and show you only the most promising tokens.

Key Advantages:

  • âś… AI-Driven: Eliminates emotional bias
  • âś… Real-Time Updates: Stay ahead of the crowd
  • âś… Transparent ROI: Know which Moonshots actually delivered
  • âś… Built-In Execution: One-click buy function saves time

Whether you're a degen chasing 10x tokens or a professional building a data-backed portfolio, Token Metrics gives you the edge.

Final Thoughts

Finding undervalued altcoins that can 100x isn’t about luck—it’s about information, timing, and execution.

Moonshots happen often in crypto. The problem is: most people are late. By the time you see it trending on X or featured in a YouTube video, the gains are gone.

Using a platform like Token Metrics, you can identify these tokens early, analyze them with confidence, and take action fast—all in one place.

If you're serious about leveling up your crypto trading game, start with the Moonshots feature on Token Metrics. Your next 100x altcoin could already be on the list.

âś… Ready to Hunt Moonshots?

Sign up for a 7-day free trial at www.tokenmetrics.com and unlock your edge in crypto today.

Research

How to Find the Next 100x Cryptocurrency Before Everyone Else | Token Metrics Moonshots

Token Metrics Team
8 min

In the world of crypto, timing is everything. If you’re trying to turn $100 into $10,000, the holy grail is finding the next 100x altcoin before the masses catch on. These explosive opportunities are rare, but with the right tools and strategy, they’re not impossible to uncover.

In this guide, we’ll show you exactly how to identify moonshot tokens—those under-the-radar gems that have the potential to skyrocket. You’ll also learn how to use Token Metrics, one of the most powerful AI-driven platforms, to spot them before they take off.

What Are Moonshot Cryptocurrencies?

“Moonshot” is a crypto-native term that refers to a low-cap cryptocurrency with the potential to deliver outsized returns, often 10x, 50x, or even 100x. These tokens may start unnoticed, trading at fractions of a penny, but once they gain traction, they can make early adopters massive profits in a very short period of time.

Key Traits of Moonshots:

  • Market cap under $50 million
  • High volatility with strong upward price potential
  • Community-driven marketing or narrative
  • Emerging sectors like AI, DePIN, Web3 infrastructure, or meme coins
  • Limited exchange listings (often only on DEXs)

Moonshots are risky—but with smart research and analytics, they can be strategic bets rather than blind gambles.

How Moonshots Work

Most 100x altcoins follow a predictable life cycle:

  1. Early Accumulation – Whales and savvy investors quietly accumulate before the public is aware.
  2. Trigger Catalyst – A social media trend, influencer mention, exchange listing, or big partnership sparks interest.
  3. Volume Surge – Trading activity spikes, liquidity increases, and price begins to move.
  4. Parabolic Rally – The token “moons” as retail investors jump in.
  5. Top Formation and Correction – Early investors take profits; latecomers often buy the top.

Catching a moonshot before Step 3 is your goal. You want to be in position before the breakout, not chasing after it.

This is where Token Metrics becomes invaluable.

Why Token Metrics Is the Best Tool for Discovering Moonshots

Token Metrics is a crypto analytics platform powered by AI, machine learning, and real-time data. It monitors thousands of tokens and ranks them using quantitative models, helping traders and investors find opportunities before they trend.

With features like:

  • Trader Grade and Investor Grade rankings
  • AI-generated signals
  • Real-time ROI tracking
  • Integrated trading functionality

…Token Metrics helps you act fast and stay ahead of the crowd.

Let’s walk through exactly how to use Token Metrics to find the next 100x cryptocurrency.

How to Use Token Metrics to Find Moonshots

Here’s a step-by-step guide to using Token Metrics’ Moonshot system to uncover high-potential altcoins.

âś… Step 1: Go to the Ratings Page

Once logged into the Token Metrics platform:

  • Navigate to the “Ratings” tab from the main dashboard.
  • This section ranks thousands of cryptocurrencies based on AI-calculated Trader Grade and Investor Grade.

Trader Grade is especially important for short-term breakout potential—it reflects the strength of a token’s momentum and technical setup.

✅ Step 2: Click on the “Moonshots” Tab

In the Ratings interface:

  • Click the “Moonshots” tab at the top.
  • This filters the token list to show only those identified as moonshot candidates by Token Metrics’ AI models.

These tokens are selected using proprietary algorithms that scan for:

  • Sudden volume surges
  • Rising trader grades
  • Favorable technical and social signals
  • Market cap anomalies

These are the coins flying just below the radar—with massive breakout potential.

âś… Step 3: Review Key Metrics

Each token in the Moonshots tab includes real-time, high-signal data to guide your decision-making:

  • Trader Grade: How strong is this token’s short-term setup?
  • Change in Trader Grade: Is momentum building?
  • 24-Hour Volume: Is there growing interest or liquidity?
  • Market Cap: The smaller the cap, the more upside (and risk).
  • Date of Entry: When was this token added to the Moonshots list?
  • Live ROI Since Moonshot: Has the token already moved—or is it still early?

You can also switch to Past Moonshots to see historical performance. Many past Moonshots have shown gains of 3x–20x within days of being listed.

âś… Step 4: Choose a Token to Explore

Click on any token from the Moonshots list to open its Token Details Page.

Here’s what you’ll find:

  • Live charts with technical indicators
  • Token fundamentals like supply, utility, and project roadmap
  • Top holder data to spot whales or early VC involvement
  • Sentiment scores and momentum shifts

This is where you do your research. Look for projects with:

  • Increasing community engagement
  • Clear narratives (e.g., AI, DePIN, meme, Layer 2)
  • Early whale accumulation
  • Undiscovered by influencers or major Twitter accounts

âś… Step 5: Buy in Seconds

Once you’ve found a token you like:

  • Hit the “Buy” button right from the Moonshots interface.
  • A swap widget will open inside Token Metrics.
  • Connect your wallet and execute the trade within seconds—no need to leave the platform.

This frictionless experience allows you to act immediately before the market catches on.

Pro Tips for Moonshot Hunting

Finding the next 100x crypto is part art, part science. Here are a few tips to sharpen your strategy:

  • Don’t Chase Pumps: Look for tokens with fresh momentum, not ones that are already up 500%.
  • Use On-Chain Data: Look for early accumulation, token holder growth, and low exchange balances.
  • Diversify: Don’t go all in on a single moonshot—spread risk across 3–5 plays.
  • Set Targets: Know your entry and exit strategy. Moonshots can reverse fast.

Final Thoughts

The next 100x altcoin won’t look obvious at first. It will likely be a small-cap token with limited press, an emerging narrative, and strong community energy.

By combining smart research, disciplined entries, and tools like Token Metrics Moonshots, you give yourself a major edge in spotting breakout coins before the explosion.

So stop guessing. Start using AI-powered insights to track moonshots, monitor early signals, and make informed trades that could change your portfolio—and your life.

🎯 Try Token Metrics now and unlock the Moonshots tab.
Visit: www.tokenmetrics.com

Choose from Platinum, Gold, and Silver packages
Reach with 25–30% open rates and 0.5–1% CTR
Craft your own custom ad—from banners to tailored copy
Perfect for Crypto Exchanges, SaaS Tools, DeFi, and AI Products